COMMERCIAL RANGER Feed pusher LARGE HERDS

COMMERCIAL RANGER  – Feed pusher LARGE HERDS COMMERCIAL RANGER  – Feed pusher LARGE HERDS COMMERCIAL RANGER  – Feed pusher LARGE HERDS

 

Overview

How can you save time and improve efficiency?

Investing in a feed pusher is probably a good solution. The Ranger automated feed pusher is a most profitable investment in that respect!

This new RANGER version has been specially designed for the intensive use required by larger farms.

Can you imagine never having to push feed towards your cattle again?

Let the Rovibec automated Feed pusher manage it all by itself!

The Rovibec Ranger will follow its magnet strip up to 40 times per day.  It will efficiently push food back to the fences. And it will even adapt to the quantity of food left in the curb!

The programmation is easy, the robot is reliable and does not require heavy maintenance. Once its job done, it will go back to its charging station until the next departure.

Because your cattle will have access to fresh food all day long, day after day. There will be an increased milk production and feed costs reduction.

The RANGER COMMERCIAL is designed for very large herds and uses requiring more power than the standard version.

It pushes back more than 100 Lbs per foot (150 Kg per metre).

  • Self-guided feed pusher robot replaces the ration multiple times a day
  • Simple, efficient and reliable thanks to the ground-inserted magnet strip
  • Full consumption of ration Increases milk according to Journal of Animal Science
  • Automaticaly adapts the food pushing distance to the curb, without programation
  • No Risk of loss of control
  • Motorized rotating skirt increases pushing efficiencies
  • Low maintenance

Technical Drawings

COMMERCIAL RANGER  <small>Feed pusher LARGE HERDS</small>

Technical Specs

Power

Electric 24 VDC

Battery

4 X 110 amp/hrs - 12 VDC AGM battery

Recharge

Automatic charger using 24VDC - 15 AMP operating on 120/240 VAC. Multiple charging locations available as an option

Traction

2 X ½ HP (375 W) Electric motor (1 per wheel)

Speed

30 ft/min (15 m/min)

Rotating Skirt

3 rpm - independent 0.5 HP (375 W)

Operating ratio – Charging / Run time

50/50

Max running time

1h - 2400 ft (730 m)

Nbr of Start

Up to 40

Path option

Closed circuit, Open, possibility of junctions

Guiding system

1/8in X 1/2in (3,2 mm X 12,7 mm) magnetic strip inserted into grooved floor

Manual mode

User friendly Remote Control

Weight

2160 Lbs (980 kg)

Pushing force

600 Lbs (272 kg)

Distance to the curb

Adjustable distance, up to 24in (60cm)

Framework

Powder coated paint

Cover and shield

304 Stainless steel

Minimum required space for U-turnN

96 in (244 cm)

Safety

Temporary stop on collision

Option

24 volts electrifier